Wearmaster Masonry Surface Sealer *Performance Line* is a water-based acrylic sealer specifically formulated to protect concrete, quarry tile, grout, marble, terrazzo and masonry surfaces. Wearmaster is easy and economical to apply, produces no solvent odor, and dries to a durable wear-resistant finish. This sealer protects hard surfaces from soil, rubber marks, oil, grease and most solvents, while preventing dusting of concrete.

APPLICATION & USES

Use Wearmaster on all concrete, stone, and masonry surfaces where a durable wear-resistant finish is required. Wearmaster has excellent adhesion without acid etching, no solvent odor, and is fast drying. This penetrating sealer will prevent the "dusting" of concrete and stone surfaces.

DIRECTION FOR USE

Floor Preparation: Do not apply on concrete less than 30 days old. Clean and rinse floor thoroughly. Floor must be clean of soil, dirt, oil, and grease to insure a strong bond with Wearmaster Masonry Surface Sealer. Acid etching is not required for bonding. Floor must be clean and thoroughly dry.

Application: For best results, apply with a string mop or airless sprayer. Allow 45 minutes to 2 hours drying time between coats. NOTE: Never pour unused portion into original container; it will contaminate unused product.

SPECIFICATIONS

Appearance

Milky liquid

pH

9

Slip Resistance

0.5 (James Machine)

Stability

Heat stable, keep from freezing

Coverage Rate

1500 - 2000 SQ/FT per Gallon

FEATURES & BENEFITS

• No offensive solvent odor
• Excellent adhesion without etching
• Fast drying and self leveling
• Penetrating seal

SHIPPING SIZE

4 x 1 Gallon Bottles
1 x 5 Gallon Pail

INGREDIENTS

• Water [ CAS# 7732-18-5 - Function: Carrier ]
• Acrylic Polymer [ CAS# Proprietary - Function: Polymer ]
• Propylene Glycol Phenyl Ether [ CAS# 770-35-4 - Function: Solvent ]
• Ammonia [ CAS# 1336-21-6 - Function: pH Adjuster ]